home *** CD-ROM | disk | FTP | other *** search
- SBRESET.COM
- Reset Utility for Sound Blaster
-
- Beta Version 1.10
-
- ======================================================================
-
- Summary
- -------
-
- This note describes how to use the reset utility. Feed back on any
- problem from users is welcome. Please see detail later for reporting
- bugs.
-
-
- How to install SBRESET
- ----------------------
-
- Copy the file SBRESET.COM to your Sound Blaster directory. The actual
- directory name depends on the card as follows.
-
- Card Type Directory name
- ------------------------------- --------------
- Sound Blaster 1.0/1.5/2.0/MCV SB
- Sound Blaster Pro/Pro2/Pro MCV SBP
- Sound Blaster 16 SB16
-
-
- Using SBRESET
- -------------
-
- SBRESET will perform a reset of the Sound Blaster card by initializing
- the Digital Sound Processor (DSP) and FM Synthesizer chip. If you
- have a Sound Blaster Pro/Pro2/Pro MCV/16, it will also reset the
- mixer.
-
- To reset your card, be sure that your BLASTER environment setting is
- correct. If it is not correct, SBRESET will return an error. See the
- installation secton of your manual for instructions on setting up the
- BLASTER environment variable.
-
- At the DOS prompt type SBRESET and press Enter. If the reset is
- successful, the output will look similar to the one shown below,
- depending on the type of card you have.
-
-
- C:\SBP>sbreset
-
- SBRESET Sound Blaster Reset Utility Version 1.10.01
- Copyright (c) 1992-93 Creative Labs, Inc. All rights reserved.
-
- I/O address = 0x220
- Card type = Sound Blaster Pro
- DSP reset
- FM chip reset
- Mixer reset
-
- Sound Blaster Pro Reset Complete
-
- C:\SBP>_
-
-
- IMPORTANT!
- ----------
-
- This utility is provided "AS IS". Your only venue to get bugs fixed
- is to complete the following form and either MAIL or FAX it to us. Any
- other methods of communciation are not applicable.
-
-
- Bug Report:
-
- If you encounter any bug, please complete the following form and print
- it out, and either mail or fax it to us.
-
- ,-----------------------------------------------------------------------------.
- | |
- | SBRESET Reset Utility for Sound Blaster Beta Version 1.10 |
- | |
- |-----------------------------------------------------------------------------|
- | NAME: | DATE: |
- |-----------------------------------------------------------------------------|
- | SYSTEM INFORMATION |
- |-----------------------------------------------------------------------------|
- | BRAND/MODEL OF COMPUTER: BUS: |
- |-----------------------------------------------------------------------------|
- | CPU: | VIDEO CARD: | PARALLEL: |
- | SPEED: | BIOS VER: | SERIAL: |
- | BIOS: | VIDEO CHIP: | EMBEDDED? |
- | CHIPSET: | VIDEO RAM: | Motherboard? |
- | RAM: | MAX COLORS: | |
- |-----------------------------------------------------------------------------|
- | HD MFG: HD MODEL: HD SIZE: |
- | CONTROLLER MFG: CONTROLLER MODEL: |
- |-----------------------------------------------------------------------------|
- | MOUSE: | OTHER ADD-ON HARDWARE/SOFTWARE: |
- | TYPE: | |
- | DOS VER: | |
- | MEM MGR: | |
- |-----------------------------------------------------------------------------|
- | PROBLEM: |
- | |
- | |
- | |
- | |
- | |
- | |
- | |
- | |
- | |
- | |
- | |
- | |
- | |
- | |
- | |
- | |
- | |
- | |
- | |
- | |
- | |
- | |
- `-----------------------------------------------------------------------------'
-
- Mail to: Technical Support Group
- Creative Labs, Inc
- 1901 McCarthy Blvd
- Milpitas, CA 95131
-
- Fax#: 1-408-428-6633
-
-
- Thank you for your cooperation.
-